eZ Track'N for Tracking "finding"  the eZ rf tags and Wander Control rf tags

eZ Track'n in its Rich Case

eZ Track'N Antenna works with the above Tracking unit.

Click Here to Play eZ Track'N Sound!

How it works there are two modes of operation

1) You can enter the ID Bit of the Resident you want to find.

2) Tracker will constantly display ID Bit of tags in a given area.

The eZ Track'N comes with a rechargable battery which runs for a little over an hour. When the battery is beginning to get a little low the Red low battery will begin to blink to let you know it is

beginning to be a little low should be charged. After a few minutes and battery is almost used up the  tracker will begin to give you 3 fast chirps. Finally when tracking unit decides that battery is to low it will shut itself off.

When you plug the charger into the eZ Track’n it will emit 2 quick chirps to confirm that the battery is charging when the power is still on. It takes about two hours to fully charge. It is recommended to charge the battery fully. It is also recommended to charge the battery once a month so that it is ready for use when needed.

eZ Track'N includes:

1) Rechargable Battery

2) Car Charger adaptor

3) 110 Volt plug in adaptor

4) Tracking Antenna

5) Nice case to hold Tracking unit & accesories

6) Full easy to read instructions

7) Quick reference guide

How it works.  There are two modes of operation

1) Individual search - Enter the ID Bit (code) on the keypad corresponding to the resident RFID tag you want to find.

                                                            or

2) General search - Do NOT enter an ID Bit (code) and the display will show all RFID tags recognized in a given search area.